Clip On Flip Up Sunglasses
These days, clip on flip up sunglasses are the in thing because not only are they very stylish, but they are also very handy to use as compared to a real pair of sunglasses. The great thing about this type of thing is that one does not necessarily need to buy one because it is so easy to make one right at home. So if one would want to try making one, then here are some instructions how.
One can make one of these things out of some cheap sunglasses that he can just buy anywhere in stores that sell cheap items. Once he gets his hands on one, then he needs to take the screws out of the part that attaches the arms of the glasses. Remember that when one does this, the pair will not be steady anymore.
After that, find a hard paper clip that does not move easily when bended. The reason why one must find a hard paper clip wire is so that it will be steady enough to support itself when attached to the eyeglasses. So now when one finds such a wire, he has to make it straight using some pliers.
Once he has straightened it out, then the next thing he should do would be to cut the wire in half so that he has two pieces. Now he should take one of the wires and slot it into the place where the arms of the glasses used to be. He should also do the same thing with the other side.
When all of the wires have been slotted into the holes, then the following step to do would be to attach the wires to the holes. In order to do this, one has to use the pliers to bend the wire so that it will be attached to the hole. Make sure to tie it in very tight otherwise the wire will just fall out later on when it is attached to the eyeglasses.
The next thing to do would be to take the two ends of the wiring and try to tie them together in the middle. Take note that the wire has to be attached to the frame of the glasses so that it cannot be seen. When the two ends have been brought to the middle, then try to tie them together.
The last thing to do here would be to make a small curve in the middle part so that it can be attached to the glasses. If there is already a small bend, then one should try clipping it on the eyeglasses to check if it looks good. If it looks fine, then one may now go out and start wearing it.
So basically, that is an easy way on how to make clip on flip up sunglasses. The great thing about making this at home is that it is cheaper than buying one outside. Also, it is more practical than an actual pair of sunglasses because it is smaller and it will not get spoiled easily.
One can make one of these things out of some cheap sunglasses that he can just buy anywhere in stores that sell cheap items. Once he gets his hands on one, then he needs to take the screws out of the part that attaches the arms of the glasses. Remember that when one does this, the pair will not be steady anymore.
After that, find a hard paper clip that does not move easily when bended. The reason why one must find a hard paper clip wire is so that it will be steady enough to support itself when attached to the eyeglasses. So now when one finds such a wire, he has to make it straight using some pliers.
Once he has straightened it out, then the next thing he should do would be to cut the wire in half so that he has two pieces. Now he should take one of the wires and slot it into the place where the arms of the glasses used to be. He should also do the same thing with the other side.
When all of the wires have been slotted into the holes, then the following step to do would be to attach the wires to the holes. In order to do this, one has to use the pliers to bend the wire so that it will be attached to the hole. Make sure to tie it in very tight otherwise the wire will just fall out later on when it is attached to the eyeglasses.
The next thing to do would be to take the two ends of the wiring and try to tie them together in the middle. Take note that the wire has to be attached to the frame of the glasses so that it cannot be seen. When the two ends have been brought to the middle, then try to tie them together.
The last thing to do here would be to make a small curve in the middle part so that it can be attached to the glasses. If there is already a small bend, then one should try clipping it on the eyeglasses to check if it looks good. If it looks fine, then one may now go out and start wearing it.
So basically, that is an easy way on how to make clip on flip up sunglasses. The great thing about making this at home is that it is cheaper than buying one outside. Also, it is more practical than an actual pair of sunglasses because it is smaller and it will not get spoiled easily.
About the Author:
Check out www.brimzsports.com for a review of the benefits of purchasing clip on flip up sunglasses online, today. You can also view our selection of sunglasses at http://www.brimzsports.com now.
You are receiving this because you signed up for it on 2011-08-21 from IP 72.177.83.171
To fine-tune your selection of which articles to receive, just login here
using your username:
To unsubscribe please use the following link:
Unsubscribe
